Got a couple OK shape PMI 1 stock class and standard feed PMI-1 bodies gifted to me a couple years ago at Bacci's. starting to get the brass bug! should probably pick up a complete PGP to start learning the wayz of the walz, xemons, jeepers and so many others here, but I thought i'd ask here and see if I can lay my hands on the following items to bring these back to life first and go from there
both have complete non cartridge valves. 1 has a bolt
looking for
Bolt
rear plug for stock class
hammer
hammer spring
Rear ASA for standard feed
hammer
hammer spring
2 trigger frames
pumps and pump arms - can 3D print these easily enough
Bacci is strangly lacking in hammers and springs. may E-mail him and see if more is not listed.
both have complete non cartridge valves. 1 has a bolt
looking for
Bolt
rear plug for stock class
hammer
hammer spring
Rear ASA for standard feed
hammer
hammer spring
2 trigger frames
pumps and pump arms - can 3D print these easily enough
Bacci is strangly lacking in hammers and springs. may E-mail him and see if more is not listed.
Comment