WGP valve tool

[Chemical-x.....ahain]

I know over the years I've had at least two of them however I cant find any trace of them or reason out where one might be. So does anyone have one up for grabs?

[Trbo323]

https://autocockerparts.com/autococker-wgp-valve-tool/

Sent from my motorola edge 2024 using Tapatalk

[Chemical-x.....ahain]

That was the only vendor I found in my searching even my local shop Pbsports has none and didnt project ordering anymore.



Since flyweight posted up the specs im gonna see if I can rustle up the stuff to make one here at work tonight.

[flyweightnate]

Get a hex standoff/ coupling nut for 10-32, and drill out one end with a 1/4" or 9/32" drill. Put it in a 5/16 socket on a 6" extension and you'll be done in no time.

You don't usually need to clear the back of the valve to get the nut free, but if it's really stuck, a size "I" drill (.272") is big enough to fit over most valves (barely) while leaving the most meat on the coupling nut.

[Chemical-x.....ahain]

Thank you Nate!!!!

[Patfl1]

I've got a spare CCM tool if you want to go high brow

[mueller]

i have a few extras lying around and will mail one to you or any MCB'er for $12 total.

[Chemical-x.....ahain]

Ill definitely pick one up.