Bearded Works Shop Log

[superman]

Here is a pic that better shows the reg cap milling. I will likely be adding this as a service for those that would be interested in reg caps.

[Chris11Amato]

Is there a noticeable difference in shot consistency using an external reg like the aka sidewinder and valve cap compared to the x-reg?

[superman]

Xvalve and classic valve function completely different. If you’re looking for the fastest recharge it is going to be an xvalve. Recharge rate wise, I originally I had the valve cap with out the added volume and it did get some shoot down. Once I added the extra space it did better. Same again for the mod to the front section. I think it helps smooth out the flow path through the valve.

[superman]

Heads up added some reg caps to the website.
https://beardedworks.com/products/bw...17a96e53&_ss=r

I also added valve body milling if people are interested.
https://beardedworks.com/products/au...17a96e53&_ss=r

[nerdcore]

Heads up added some reg caps to the website.
https://beardedworks.com/products/bw...17a96e53&_ss=r

I also added valve body milling if people are interested.
https://beardedworks.com/products/au...17a96e53&_ss=r

Damn. I was intent on selling my automag w/ classic valve (pretty sure i bought all that from you, lol) but now THIS. What output does an added inline reg need to have for this? I have a couple laying around.

[superman]

550-600ish with a level 10. I will likely have rails available at some point.

I will likely make logo less back caps in the future. Easier to align with everyone's valve and don't have to worry about clocking.