Announcement
Collapse
No announcement yet.
[CCI Phantom] Juan Deag. Project
Collapse
X
-
Going to stop 'iterating' and start production of pre-orders since I think we're solid I mean we were solid at the start but now we're at like 120% completion on this project and it's looking like a real sweet kit imo. Of course must do one final test but yeah maybe 1-2 weeks-ish to ship those and post up new media of the updated stuff.
-
I think it's the same. As far as OD on a barrel... I'll have to double check but that might work. And if not. I do have other things it could fit on...
-
0.954" is the maximum barrel clearance I can make, otherwise it's shrunk down to 0.873" the phantom stock barrel. What's the AC barrel OD?
-
Did they relocate the threaded pump rod location or is it the same? (i.e. new grip grame). Otherwise I believe there is room for 1" bodies and 1" barrels I can check.
-
I wonder if this round work on a revolution... Though mine is the cocker threaded body not the phantom...
- Likes 1
-
Thx :P From what I'm seeing it should be a copy-paste job (at least for the slide) to port this over to the trracer, minus the offset feed as cutting place for that would probably require some work to not have it destroy the structural stability. Grip frame might be different for the slide lock so I dono. I'll wrap around to trracer after I finish up 102% here, but as pm might sooner.
-
Oooo I'm really liking this... I want to adapt this to a Trracer
Sent from my VS501 using Tapatalk
- Likes 1
Leave a comment:
-
Too many CADs not enough prints srry here's the slide lock position tho if anyone was curious. Will bolt to back bolt location, seems legit. Already tested and works fine, just gonna fix up the angles so it doesn't slip and we good on the slide-lock function. Can't wait to test this thing again since I totally tore down and cleaned this phantom and fixed all leaks. Not ambidextrous sorry lol. The position is very close to the safety, but unlike the real m1911a1, hitting the slide release doesn't accidentally engage the safety :P nice!
Last edited by ReconSWS; 04-23-2021, 08:14 PM.
- Likes 2
Leave a comment:
-
I think I have to find a place for a slide lock... I fear the marker was only locking back so well because it is so dirty inside, and now that I've polished the internals clean I think the slide-return spring will just kick in and retun the slide as soon as you cock it. Luckiily this spring is weak, and can easily be held open with the thumb notch for loading, but I want a good slide lock. Gonna look into this real quick.
Leave a comment: