What did you 3D print today?

[Spider!]

Lol, I thought I recognized the parts, just couldn't remember.

[Jackson]

Wexford. I've got one more big +6 hour print left and a number of smaller items.

[pghp8ntballer]

Very cool. I’d love to see the finished telescope! So uh, where abouts in Pittsburgh do you live?

[Jackson]

Some pieces I've been printing over the past week.

[superman]

[Brokeass_baller]

Gotcha. That's what I thought, but I thought I should verify. Lol

[RAZRBAKK]

Brokeass_baller I believe he means pulling it Into the breech. The barrel is sized to stop the freak moving forward in the barrel.

[Brokeass_baller]

The way I understand things is there's enough room in front of the bolt with A5 threads that's it's not an issue. But for 98 threads, it'll catch if there isn't a gap.

Edit: wait, do you mean pull out the front of the barrel? Or get stuck in the bolt o-ring and pull out the back and into the breach?

[RAZRBAKK]

Toestr, hmm, hadn't considered that. I haven't fired it yet. Will have to mess around and see what I can do about that.

EDIT: Upon further inspection, no. Seems like the insert is large enough to catch on the edge of the breech. With the barrel in and the bolt cocked I'm not able to push it into the breech.

[Toestr]

Won't the bolt pull the insert out the back?

[RAZRBAKK]

Well, I've been maniacally printing things and learning a ton.

Recently picked up an A5 that I wanted to put a TASO Raincover on. Unfortunately, the stock Tippmann barrel, and I can only assume many of the aftermarkets are just a bit too girthy to fit into the old rain cover.

So I made my own.







I really need to upgrade from PLA so I can actually use these parts.

[RAZRBAKK]

Alexndl just PLA. If this part comes out nice I will probably pay for it to be professionally printed.

[Alexndl]

Nice work
PLA or PETG?

[RAZRBAKK]

Just messing around, but a decent concept.

Not pictured: at least 30 prints with different settings to get these to fit together properly.

[Brokeass_baller]

I'm honestly itching to play with it. If I can figure out something to increase the velocity, I think I'm going to take it to the field with me next time.

But a fat pump handle is a must. I can hardly even grip the stock one.

There are a surprising number of files for them on Thingiverse.