Hypermag valve

[RUN100]

Looking to part ways with a hyper valve and wasn’t sure on the value. I know I won’t be using it so let me know what you guys think, thanks !
I can provide more/better photos, and even rebuild it if it leaks, just looking for a ballpark amount

[punkncat]

You should ask on the Automag groups within FB....I feel like you already did?

[RUN100]

Yes, I didn’t really ask a value (I could though) more what it was made for

[Jonnydread]

I don’t know much about mags, but didn’t Centerflag make a hyper frame for them? Maybe it came with custom mags??

[Ecapnation]

No in this case no relationship.

[Cunha]

I want it to be from a centerflag hyperframe equipped automag but the hyper lettering makes me think not.

[Brokeass_baller]

These things had a smaller dump chamber and operated at a higher pressure. This increased air efficiency. Otherwise, they're standard classic valves with an 8 hole mod.

[Brokeass_baller]

I think Oh Pawlack promoted these for a while.

[k_obeastly]

so this would have a stiffer trigger pull and be worse for a hyperframe due to the higher pressure on the on/off valve?

[Brokeass_baller]

I'm pretty sure the magic number on these were 20%. So yes, 20% lower volume, 20% higher pressure, 20% more efficiency, 20% heavier trigger pull.

[Ecapnation]

so this would have a stiffer trigger pull and be worse for a hyperframe due to the higher pressure on the on/off valve?

Technically... Yes