Announcement
Collapse
No announcement yet.
Freak inserts smaller than 0.675?
Collapse
X
-
Freak reball insert arrived. It is smaller than my .675 insert, tested with the small paint my field has been carrying and it’s too tight of a fit. Looks like what I need is a 0.673 insert… Finger detents it is!
For reference the paint is HK level 3 yellow shell & fill.Last edited by durandal; 06-26-2021, 04:26 PM.
-
Jonnydread Do you know if the finger detents will work on roundhead bodies?Last edited by durandal; 06-21-2021, 06:45 PM.
-
You might need to switch over to the Tech-T kits. The full kits include inserts smaller than .670
Leave a comment:
-
Originally posted by DocsMachine View Post
-8.000" long by nominally .750". (Most often about .745" to .748".)
Doc.
Easy-to-Weld Grade 9 Titanium
Grade 9 titanium has less aluminum and vanadium than Grade 5, so it's easier to weld but not as strong.Wall
Thick.OD OD Tolerance ID ID Tolerance Straightness
ToleranceSpecifications
Met1 ft. Lg. 3 ft. Lg. 5 ft. Lg. 0.039" 3/4" 0" to 0.004" 0.672" -0.003" to 0.003" 0.025" per ft. SAE AMS4945 8806T23 83.39 225.86 347.47
Leave a comment:
-
Found a green reball insert that says its 0.670 on ebay. Gonna try that out and report back, if not finger detents are the backup plan.
Leave a comment:
-
Originally posted by OpusX View PostSo I guess the question is, what are freak and XL insert dimensions (length and OD)? Seems some McMaster-Carr shopping might be in order.
Doc.
- Likes 1
Leave a comment:
-
I’ll have to try that next time, gotta dig them out of my parts box
Leave a comment: