WWA Pump kit- anyone know of a clever way to extend my pump handle?

[maggot]

I recommend swapping the whole kit for a CCM or Slice. There are a few of us, like me, that can't stand the silly awkwardly far forward position of the CCM kit. Actually prefer the WWA or JCurt.

[SETHZILLA!]

I looked high and low and don't see it anywhere. Sorry my man. I would recommend the 3D print version and have someone make you something longer to fit your WWA kit.


Sent from my SM-G970U1 using Tapatalk

[The Inflicted]

I thought of a hockey puck!

Wonder if there's some type of readily-available plastic or aluminum washer that could be stacked.

[The Inflicted]

I have a WWA pump kit, I'll check the various 3d printed handles i have and get back to you with which one fits the pump guide rod.

Sent from my SM-G970U1 using Tapatalk

That would be excellent. Thank you!
I imagine that as long as the center rod is close it would be very easy to drill the handle to accommodate the starboard guide rod.

[SETHZILLA!]

I have a WWA pump kit, I'll check the various 3d printed handles i have and get back to you with which one fits the pump guide rod.

Sent from my SM-G970U1 using Tapatalk

[Cdn_Cuda]

There’s a nice flat mounting surface of the front of the pump kit, so that’s helpful. How about something like a cut down hockey puck? You could cut it down to make it fit the dimensions of the pump handle.

[anson]

Easier just to 3D print a whole new pump handle

[The Inflicted]

Clamshell 3d print part that step over the current pump handle?
Or a 3d printed part that replace the pump handle

I could try it to design and print something but it might take some time

If something were to be totally custom designed/printed it would probably be easiest to have the part interlock with the fins/ridges of the existing pump and interlock that way.

[Alexndl]

Clamshell 3d print part that step over the current pump handle?
Or a 3d printed part that replace the pump handle

I could try it to design and print something but it might take some time

[The Inflicted]

What about the slice kits offered by Autococker Parts dot com? I think you can make those longer or shorter, if I remember correctly.

I'd rather not replace the entire kit/ASA/rods, primarily for cost reasons.

Would be really groovy if I could just replace/extend my existing pump handle.

[BlindFaith429]

What about the slice kits offered by Autococker Parts dot com? I think you can make those longer or shorter, if I remember correctly.

[The Inflicted]

I've got a WWA mini pump handle on my pump and have come to the conclusion that it just doesn't feel right in my hands. I'm wanting another 1-2" of length to the pump handle. I know WWA made an extra-long version of the pump handle, but that was years ago and he's long-gone.

I'm wondering know what my options might be to either extend my stock pump handle or replace it with something longer.

I thought about maybe bolting a golfball-sized... something to the front of it to give me a little extra length to hold on to, but I don't know exactly what that would be. Is there some common, semi-expendable object that would be easy to attach? Or perhaps a 3D-printed extension of some kind?

Alternatively, it looks like a lot of people are making and selling inexpensive replacement WGP/Empire pump handles these days but I haven't seen any offered specifically to fit the WWA kits. I would imagine it would be fairly simple to measure what the position of the center rod and guide rod are and have someone make something that would work, but I don't know how much time that would take someone and if it would be worth it.

Any thoughts on the easiest way to do this?