3-Way Disassembly (it's modular?) w/ Pics

[JCHoefer]

I'm pulling apart my Revenge V2 for a deep cleaning because it's leaking a bit after sitting a few years.

I pulled off the 3-way and completely disassembled it. The internals are modular!

Here's a pic while I'm still cleaning it up.

So, what type is this? And what size are the original o-rings?

[flyweightnate]

Been a while since I've torn one apart but it looks like a PPS Quickswitch. I'm sure Palmers will sell you the oring kit, but I don't know what sizes they are.

[fullofpaint]

It's a Palmer's quickswitch. They used to have a manual for it but seems like between the new MCB and Palmers site it's gone. They take normal 3-way o-rings on the stem so 003's and the cups should be 046x.224.

[JCHoefer]

Great! The orings on the valves fell apart when I removed them....so that was likely the leak issue. Hoepfully I can find a manual to make sure I put it back together correctly once I have the new orings!

[JCHoefer]

Got my seal kit in the mail today (along with one for the ram). Put it back together and NO LEAKS!

Now I'm waiting on the new o-ring kit for the Armageddon...

[JCHoefer]

BTW, here's the assembly guide that Palmer's sent me....