instagram takipci satin al - instagram takipci satin al mobil odeme - takipci satin al

bahis siteleri - deneme bonusu - casino siteleri

bahis siteleri - kacak bahis - canli bahis

goldenbahis - makrobet - cepbahis

cratosslot - cratosslot giris - cratosslot

Announcement

Collapse
No announcement yet.

Autococker Bolt O Ring Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sniperfan
    replied
    I assume this is a Cooper-T type detent? Have you tried turning it out half a turn? I've run into this from time to time.

    Leave a comment:


  • Jonnydread
    replied
    I don't use o-rings on my delrin bolts and they're fine. I'm fond of ANS venturi bolts and I use thinner o-rings on them, not enough to really cause much more friction.

    Leave a comment:


  • Magmoormaster
    replied
    Most of my teammates take one of the detents out of their empire/id guns for this reason. Unless you’re using a high tension force feed loader, I’d be more inclined to do that than pull the oring off the bolt. Id bolts have blowback problems as it is.

    Leave a comment:


  • lew
    replied
    Unless the bolt is a really loose fit in the bore, you'll be fine. My most efficient Cocker just had a Delrin bolt without o-ring grooves.

    Leave a comment:


  • Jordan
    replied
    WGP got rid of the front oring on the bolt in 2000 or 2001 I think.... you'll be fine without it.

    Leave a comment:


  • Trbo323
    replied
    Efficiency really, maybe some consistency as well but I'm all honesty, I would try it and see what happens.

    Also go down a size and see what happens

    Sent from my Moto Z (2) using Tapatalk

    Leave a comment:


  • pearcem
    started a topic Autococker Bolt O Ring Question

    Autococker Bolt O Ring Question

    Any actual downside to running autococker bolts without O rings (or at least the front one)? Specifically on a pump

    I have a pump that I am trying to smooth out the stroke on. It is an ID gun, with ID bolt, and it seems like the front O ring is dragging a ton on the detents. I realized I have always either had guns that were pumps with O ring-less bolts like CCM, or most of my guns with O rings on the bolts were set up as mechs.

    Trying some different sizes would always be an option as well. Thanks
Working...
X