Got this a while back. I might have kept it if it had a foreword assist (come at me Forgotten Weapons fan boys). Spray painted in a 'Van Gough' colour scheme by the previous owner. The finish feels pretty durable but doesn't look the greatest from up close (pic 3). This is the most realistic feeling marker I've ever held.
Hardware and critical orings are all metric.
Cycles nicely. Was shooting 260s-270s. One velocity spring included (Spyder springs are too large in diameter).
Includes 4 18rd magazines. They look to be made of polycarb (like halo shells, but reinforcing ribs make it much more durable). Some cracking around the edges at the top (pic 7), but they still feel solid. The 2 marked with tape had misfeeds, probably need a new springs (Helix mag springs should work). The mags can supposedly use FSRs but I'm not sure how well they feed. Marker can also take RAP4 and Milsig roundhead mags (these mags are better).
Barrel is a 14" .685 CP tactical barrel with mock suppressor 7/8ths threaded (takes CP, LAPCO, Killhouse tips).
Also includes a jig to make new wire detents from paper clips, original detents (paper clip ones in there now), some spare screws and enough orings to rebuild at least once (hammer orings are 70D VS 90D factory spec, not sure how well they'll work, still has the original oring).
No 13ci included.
What's it worth?
Hardware and critical orings are all metric.
Cycles nicely. Was shooting 260s-270s. One velocity spring included (Spyder springs are too large in diameter).
Includes 4 18rd magazines. They look to be made of polycarb (like halo shells, but reinforcing ribs make it much more durable). Some cracking around the edges at the top (pic 7), but they still feel solid. The 2 marked with tape had misfeeds, probably need a new springs (Helix mag springs should work). The mags can supposedly use FSRs but I'm not sure how well they feed. Marker can also take RAP4 and Milsig roundhead mags (these mags are better).
Barrel is a 14" .685 CP tactical barrel with mock suppressor 7/8ths threaded (takes CP, LAPCO, Killhouse tips).
Also includes a jig to make new wire detents from paper clips, original detents (paper clip ones in there now), some spare screws and enough orings to rebuild at least once (hammer orings are 70D VS 90D factory spec, not sure how well they'll work, still has the original oring).
No 13ci included.
What's it worth?