Toestr's Misc Items (Updating)

[Toestr]

Just some misc stuff I don't want. I'll probably add more stuff in time. Any questions please ask. This is mostly meant for local pickup but I suppose I could ship if you're really interested.

Automag parts (Only the sight rail remaining): $5 each. Raw (aside from some anno left in the threads in the VASA) and have some deep marks. These would be good if you want to experiment with milling or anno patterns.

XSV Drop: $5

Ninja PTC fitting set: SOLD $5 SOLD for all. I don't like these. They get leaks easily and are hard to connect/disconnect at normal tank pressure. The female fitting has tool marks from using vise grips to get it apart. It could probably be cleaned up with Emery cloth and cold bluing liquid.

Original WGP Autococker LPR: Free. Apparently these are terrible regs. Might be good for completing a display piece.

AA Vigilante: *SOLD* $45 *SOLD*. I just replaced the orings but the seat is older. It holds air and outputs 0-600psi but I haven't tested for shootdown. It's pretty marked up on the outside and the brass adjuster screw is stripped for a hex key but the nickel adjustment slot is ok (you would have to degas to adjust). The hex slot would be easy enough to drill out and broach for the next size up if you have the tools. I would keep this if it wasn't for the adjuster. I can probably include a macro elbow.

Sent from my Pixel 4a using Tapatalk

[Jordan]

The Mag parts are tempting...

[Toestr]

Shall I add it to your order?

[Meleager7]

Jordan, were you shaking that can of wrinkle coat paint in one hand and typing this with the other......!?

[Cdn_Cuda]

And here I has going to rebuild one of those terrible Autococker LPRs. Guess I’ll rebuild the other one then!

[RAZRBAKK]

I'll take the ninja fittings.

[Toestr]

New additions:

*SOLD* Proto Primo *SOLD*: has the typical scratches and some hairline cracks in the lid at the hinge (feels strong enough).

Dye Rhino tank cover: has some significant fraying and paint staining but still in usable condition.

$5 each.

[Toestr]

More items!

Armson/PTP Tippmann 98 CAR15 Stock: $15. (*NEVERMIND I'M KEEPING THIS*) Four position stock with MilSpec buffer tube (has some marks on it). Has a brand new steel castle nut with 3 staking points (needs an armourer's wrench but you can grind/file in normal wrench flats).

M16A1 Carry Handle: Free. BT branded but identical to an Armson/PTP one. Mounts to 11mm dovetail rails. Missing the sight assembly and a mounting foot (still mounts securely).

Drop: Free. The mounting shoulders for the screws on the gun side seem pretty thin and have wear on the surface of the holes.

Tippmann 98 Flatline barrel: SOLD $20. Complete, has some small scratches and scuffs. I will test it out sometime next week hopefully. I believe Tippmann still refinishes the bore if it is shot out. SOLD locally for $10.

Sent from my Pixel 4a using Tapatalk

[Toestr]

I also have a Eurogrip I will trade for a Lone Star.

[anson]

I have a Lonestar grip you can have. Just remind me next time we meet up

[Toestr]

Thanks, I appreciate it.

[RAZRBAKK]

I'll grab that automag rail from you.

[Toestr]

You got it. You should note that it has some deep gouges in the side.

[RAZRBAKK]

That's a-okay with me.

[Toestr]

The Flatline barrel is tested and confirmed to shoot paint into the ground.

Sent from my Pixel 4a using Tapatalk

[Toestr]

14" gloss black AA freak tip. Has the usual small dings and micro scratches. I'd like to trade for a different freak tip (preferably a longer AA or teardrop in black or clear, silver pewter, etc).

Sent from my Pixel 4a using Tapatalk

[Cal440]

Interested in the proto and the armson,still available?

[Jordan]

Are the Mag parts still available? I could use the rail if Razrbakk didn't grab it yet.

[Toestr]

The rail is gone. Sight rail and VASA are still available.

[RAZRBAKK]

I'll give you the rail, I don't think I'm going to be using it.

[Jordan]

RAZRBAKK - I'll gladly buy it off you. I'll drop you a PM between now and the 17th about it.

Toestr - just needed the rail, I'm afraid. Might be back for the VASA, though.

[Toestr]

*SOLD*

Brass Eagle Point Zero ghost ring sight: $20 OBO. Pretty neat. It was too small for most of the dovetail rails I tried it on. I'd recommend bringing what you plan to mount this on to a meetup to test the fit. The previous owner drilled and tapped this through the top (off center and not quite square) to secure it better. Has some corrosion in the rear aperture and various dings.

[Toestr]

Chrome Beavertail & 2K+ Back Block: $5 or free with any other purchase. Beavertail has quite a bit of pitting all over. Back block has a little pitting in the bolt and pull pin holes, otherwise very clean.

ALL SOLD*

Sent from my Pixel 4a using Tapatalk

[Toestr]

*TRADED*Chrome WGP ram. The chrome is in excellent condition with the only wear being on the back where it contacts the front block. The shaft is straight. Gets good suction and was working fine when I briefly aired it up the other day.

I'd like to trade for another rebuildable ram (brass or aluminum WGP 2 piece being the most likely candidates, but would add money for a Shocktech or Inception).