It's flat on top unlike the dm frames of similar years and the hole for mounting are those slots for hidden screws so if i need to move a screw it should be easy and still look nice.
-
Bought a nt10 frame that I'm going to make fit. Chose this generation since I have that dm12 board I mentioned in the original post as well as a set of grips to put on it.
It's flat on top unlike the dm frames of similar years and the hole for mounting are those slots for hidden screws so if i need to move a screw it should be easy and still look nice.
-
None were made specifically for dm3's... I've only seen PM5, dm4, or dm5 ul frames modded to fitLeave a comment:
-
gen e compatible ultralight frames?
pretty much tittle, I have a gen-e matrix and want an ultralight frame for it, what years are compatible? Bonus points if a dm12 board fits as I have a spare one of those and have noticed that most frames on ebay don't have boards.
if need be I can move screw holesLast edited by jetenginekyle; 03-17-2024, 01:18 AM.
Leave a comment: