My ongoing Pimp project...

[DavidBoren]

Figured I have enough to post now that my first AKALMP parts shown up.

Here's what I have so far:
Evil Pimp kit,
Evil Impulse hammer,
AKALMP SCM-3/volumizer combo,
TechT iFit Impulse-to-AC adapter,
NDZ Rip valve,
NDZ 15* ASA (needs a custom gas-thru bolt),
NDZ trigger guard (PMR?),
NDZ bolt/Ti pin (still need to slot the body),
NDZ ram/housing,
WAS board.

Still needs the trigger guard fit, the LPR guage hole needs filled with a plug (or the world's smallest 0-100psi guage), a nickel AKA Javelin barrel, a black AKA finger groove Sidewinder, black AKA drop-forward, a black AKA Bushmaster feedneck, AKA eyes, AKA 25g trigger switch, AKA On/Off switch, AKA battery harness, AKA detents, silver or blue NDZ On/Off...

[DavidBoren]

Not much of an update, but I did get the 15* ASA installed... the Pimp originally had 1/8npt threads, and it now has 1/8nps threads. Lol. Added an AKA drop-forward and NDZ On/Off. Found a NDZ feedneck that fit. Threw in an Evil Driver barrel as a placeholder. Evil Detonator reg as placeholder, too, just to show off the new ASA.

[DavidBoren]

Javelin barrel came in!

Now I have to decide if I want a finger groove Sidewinder to match the shape and finish of the volumizer, or a nickel Sidewinder to match the finish of the LPR and barrel... they don't offer the finger groove Sidewinder in nickel. Opinions?

[Jordan]

Maybe a nickel Ergo reg? They have finger grooves and are pretty decent regs with the right adjustment range for a Pimp.

[DavidBoren]

A nickel Ergo reg would definitely satify both criteria, and is something I hadn't considered. Probably cheaper, too.

However, this may be as close as I ever get to an Evil Ehm, so I am kinda d!ckh!gh for AKA, right meow. I can be super stubborn sometimes, regardless of merit.