Hey anyone know where I can find a manual for this?
-
Good question, I have no idea, but I am quite familiar with those guns and could try and answer any questions you might have! -
I have it on PDF on my phone. Hopefully it attaches correctly to this reply.
The manual doesn't mention it, but this seems like as good as place as any to drop some random ZXS600E knowledge...
Barrels threaded for the Brass Eagle Raptor will work in the ZXS600E, but the shank has to be cut down. I measured 1.401" from the shoulder to the breech on the ZXS600E barrel.If you need to talk, I will listen. Leave a message and I will call you back as soon as I get it.
IGY6; 503.995.0257Comment
-
Awesome thanks! I also got a stock spyder barrel and some kind of brass spyder barrel to work on it with no problems.Comment
-
Ok have two questions on this
How far should the screw in the back of the bolt be screwed in?
And what type of board would I need to update this? I don't mind fabbing it to fit.Comment
-
Probably a Dangerous Power board, given that they are pretty much the only company that made/makes(?) modern FASOR's... and if I remember correctly, the DP boards should fit in the grip. BKO's were also FASOR's, but I don't know if the board will fit... or how easily you can find them... or if they will be any better than the board in it already. So, yeah, Dangerous Power boards.
Or you can go mech...If you need to talk, I will listen. Leave a message and I will call you back as soon as I get it.
IGY6; 503.995.0257Comment
-
I have a dangerous power fusion f7 board and it doesn't function the solenoid. Making it a mech would be a cool idea.Comment
-
Small update on this project! It's now fully adjustable and tourney ready!
Now I just need to figure out how to fix my cracked frame but as is it's ripping.
Comment
Comment