Took my new to me hellion out today and man it just ripped. It's been out twice before but just wasn't fully spot on. Sized at a .284 running about 285 on the Chrono and it ran all day no chops with 4 star gi paint. Probably ran 2/3 of a case through it. One thing I did different this time. Dialed with the pressure meter to 160 factory 7 turns and did a fine tune off the reg vs the back of the gun. Seemed to behave a lot better then tweaking it at the dwell valve. Could also have been up sizing the insert to the .284 and a liberal amount of dow 33 on all rings but it really made me fall in love with this gun today.
- Welcome to MCB! We are the most popular and active paintball forum found on the internet! Thank you for stopping by. If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.