An 05 Superstock I’ve been shaping for a year now. Not sure when I’m going to finish it, been shifting my attention to other things. Still need to get it cut for mid-block, finish blending the extended reach, source an lpr and anodizing.
-
Just picked up a B2K4 w/pds and a Dangerous Power trigger frame. Gonna try to cobble together my own trayless kit and throw in a morlock board for modern play. If it works, might even send it out for anno.Comment
-
This flash, which somebody thought needed to be spray painted over. See the forgrip, body is cleaned up already
On one hand the spray paint probably protected it a bit over the last decade. On the other....I have to remove it....
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
1 Finnish GX5 prototype ( cant decide on the frame)...Pic 2&3..
Build the NOS GX5.. pic 1
Build once more the empty GX5 Lapco body and have eye covers made...pic 3
Comment
-
I have a PPS Squall I need to put back together. Going to possibly get a K frame for it too.Comment
-
Got the Morlock MK3 and an Autococker to come to an agreement.
Last edited by Roger7pball; 05-11-2022, 08:22 AM.Comment
-
Just posted my latest project in the sheridan section. It's a fun one for sureComment
-
This is out for ano, should be done in a few weeks.
I'm casually working on a 95 cocker that i'm throwing some fun parts on; meteor single hole grip frame, Bill Macke reverse front block, I'd like to get a jam bolt for it too.
I also have an old Spyder One I'm building up with some kinda cool parts. Has a Bob Long double trigger frame and a flush cocking kit. I just recently thought up a way I can easily convert it to centerfeed using the feedneck block from a Boss Raider. Trying to go low-ish pressure too.
The last two aren't technically mine, they're just junk guns at my proshop I'm messing around with.Comment
-
Basically everything is a project for me...
But this is the one that I can actually see a horizon on. It's just a mock-up right now. It will have some sort of LP valve in it and I might switch the Flatline out for a screw in Maxflo bottomline. I hope the VA doesn't restrict flow too much.
Comment
-
Why would someone spray paint over this!?!?
I'm a little miffed at this one
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
I finished a project! Cleaned this up and fixed the leak.
I can haz feedback?
If I owe you feedback, just remind me, as I sometimes forget.Comment
-
4 down (one not photoed) 6 to go
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
Sanded, polished and re-blued the rusty rear bolt housing from a 68 special that I picked up from an MCB’er last week. One of my favorite looking and feeling guns ever - has that brutal utilitarian gun like look to it (till you add a hopper anyway). Almost got all the parts I need. Will let the blue go overnight and warm it up for a hot wax on the exterior for some protection
Comment
-
6 down, 4ish to go
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
I'm converting my Nasty to a Hurricane with TPGM™... Sheridan grip frames are way too small for my hands and uncomfortable with a UMB.
I've got the body mods done, just waiting for the 4way I bought on Ebay to arrive so I can finish the trigger mods.
Comment
Comment