FreeFlow Dye UL Cocker Frames (Only 50)

[Chuck E Ducky]

I would trade mine for a Nummech gas threw frame if anyone wants one of the Dye frames now. (Mag or Cocker)

[cfos00]

Got one from ANS, and it couldn't do what I was hoping so I sold it (I was looking to R/T it...wouldn't work well for that). I do have to say, heavier than I thought they'd be. When I think UL frame, I think light...and these have a lot of extra meat on them. Pretty comfortable, but had I kept it I would have taken the mill to it and diet milled the thing. And I didn't expect that.

[Aluminumchef]

There's some shenanigans happening here. I ordered a couple of these in separate orders. I just got an email that the ones I ordered have been switched to pre-order. Looks like the site's been updated to pre-order now too.
Did any of you that ordered one have yours shipped out?

There's almost always shenanigans with them. Best bet is buy from eBay store.

[maggot]

They're still jerking me around and are unapologetic. I'd feel a lot better if I cancelled my orders, but I'm a sucker and really would like to get one of these...

[Handy]

If it makes you feel better they likewise have not done anything about mine and I'm about to message them to cancel my order.

[Brokeass_baller]

Might be worth hitting up FreeFlow directly and asking if they have any blemishes for sale. That's how I got mine. I missed the original pre-order, reached out to see if they were planning another batch, and ended up buying a blem for a $50 discount.

And he's the kicker, there ain't a damn thing wrong with it. If there's a blemish somewhere on it, I have yet to find it.

[ChuckLove]

Check your messages.

[latches109]

I have one for sale $250 shipped. Bnib

[superman]

ANS is expecting them mid October now based on the email i got today.

[superman]

"We appreciate the email. The manufacturer is waiting on packaging and then the frames will start to ship to us. Thank you for your patience and understanding."
This was sent about 10 mins ago.

[maggot]

I'm so glad Chucklove hooked me up with one, so I got to cancel my order months ago. ANS really pissed me off with their handling of this... although I'll probably come back to order another one when they finally stock them b/c I'm a whore like that.

[superman]

Just got the shipping notification from ans.

[Murph]

Woo. There’s hope!

got my notification too!

[superman]

[minimag03]

Sorry for the necropost here but I'd love to hear what you guys think about this frame after owning it for awhile?

Does it have a trigger stop drilled and tapped from the front of the frame? Does it take standard thread glide screws (like same as Benchmark)? 98+ trigger plates?

When I was playing year ago I always wanted a slide frame with the UL grips. I'm tempted to buy one to try it out.

[Moodog]

I hate mine, I will be putting it up for sale in the next week or so. I would recommend finding a Mozak frame instead, they are much higher quality.

[Tracker]

I just got finished building a fully cu stom cocker with one of these frames, so far I don't hate it, but I also admit I haven't played a game with it yet either

It is one of the original 50 (so it has the dust black plate and a ff roller sear), but one of 5 that were raw, someone was nice enough to include brass tipped glide screws (that I polished) the one below the plate is longer than I'd like, but I don't notice it thankfully, I think it feels nice and I don't have anything "nicer" to compare to anyways

Yes it has both pre and post travel adjustments, they cut some corners in the design by nixing the bottom line cam lock they have on every other frame of similar design. So now to remove the bottom line off the dovetail, you gotta do grubscrews from the inside frame. Or you need to send it to a machinist for t-slotting, and from my understanding it will take any 98+ plate and sear combos within reason

Mozak frames are nice, traditional frames, but exceptionally hard to find, typically only available by preorder, and only in small runs.

[minimag03]

Tracker: it has pre and post travel stops?? I've never seen a 98+ frame with a post-travel stop.

Glad to hear the glide screws are standard sizes as well. I have a bag full of brass tipped screws somewhere.

Moodog: I appreciate the input. The Mozark is appealing and I'll look into them. Do they have a pre-travel trigger stop? That's probably the most important feature to me.

[Magmoormaster]

I never actually used mine, but once you swap the plate out for a chrome plate they're really quite nice. The dust black trigger plate feels like crap. I don't think they're my absolute favorite, but I'd say the trigger feel is comparable to Benchmark frames or whatever.

[Chuck E Ducky]

I used a different trigger plate on mine.

[Tracker]

minimag03 the post tavel can be adjusted by the bottom of the sear it's 10-32 for that one, will need to be an 1.5 inches of threads minimum, all the socket caps start developing a shank after one inch, the front one is obvious it's gotta be a small grubscrew to not interfere with the front screw threads, I had one handy so I didn't have to hunt for the thread sizes sorry

And I don't notice a lot of gritty ont the pull, but I do plan on keeping an eye out for an AKA plate..

[minimag03]

Ahhh I see now, similar to the WGP hinge's post travel stop. It makes me so happy to see trigger stops on these new slide frames =) I believe 10-32 is the standard thread for glide screws iirc.

I wasn't too concerned about reports of it being gritty, confident I can fix issues like that with some tinkering. And an AKA plate is always a good idea! Wish Jared would make more 98+ plates.

And thank you for taking pics for me! Much easier than trying to explain lol

[superman]

If you guys decide to go a different direction, I have new shocktech plates in stock. I just finished building a cocker for Mcb member with a shocktech plate.
also the rear guide screw is 10-32 front is 8/32 front one is really like 8/32 x1/8”.

[superman]

These things will go.

https://www.youtube.com/watch?v=y4AB-3h24dM