Thread: Trracer pumps
View Single Post
Old 07-21-2006, 11:53 AM   #5 (permalink)
Post Whore
Frontier_Bill's Avatar
Join Date: Jul 2006
Location: Bozeman, Montana
Send a message via MSN to Frontier_Bill

Problem is, my finer sandpaper is expensive stuff that i used for polishing things on the lathe and, well, i cant exactly find it...

But the corrosion on the hammer is rough, there was even crap in the hammer tube and inside the valve. I have never seen internals so gunked up and/or corroded!

Some of them were in great shape though...
Frontier_Bill is offline   Reply With Quote