View Single Post
Old 04-25-2007, 11:39 PM   #2 (permalink)
Phantom Power
Ghost with the most
Phantom Power's Avatar
Join Date: Mar 2006
Location: Pender Island, BC
Send a message via AIM to Phantom Power Send a message via MSN to Phantom Power

I'm pretty sure that threaded insert is soldered in to the lower tube (or in your case, not so soldered in anymore). That may require some hot work to repair. You may be able to use a very strong epoxy to remedy it, but you'd probably need to be gentle in screwing the front frame screw in from now on.
Phantom Power is offline   Reply With Quote