Thread: T2 consistency
View Single Post
Old 09-29-2010, 05:53 PM   #6 (permalink)
MCB Member
Riddler's Avatar
Join Date: Apr 2006
Location: pgh, pa

The sweet spot is a bit on the high side for fields with low limits (even with the IVG backed all the way out), so the discussion was how best to set your marker for lower speeds. Personally, I do it by running a slightly higher pressure, and don't see much in the way of efficiency losses (remember that pressure affects valve dwell, too).
MCB feedback
Riddler is offline   Reply With Quote