View Single Post
Old 10-05-2010, 12:46 PM   #4 (permalink)
Join Date: Oct 2010

Got the problem fixed. CMM techsupport is great.

Basically I switched from a 45 trigger to a 86 and the sears are different sizes. I had to turn the top allen under the bolt 1.5 turns until it was timed correctly.

Basically hold the trigger down and pull the pump handle back. then bring it slowly forward until it fires.

Look at the spot where the gun fired. If it is over the size of a nickel 1/8 inch then you need to adjust it. Turn the allen head clockwise a half turn at a time until you get close then find the sweet spot.
Jdohman is offline   Reply With Quote