View Single Post
Old 08-08-2007, 10:01 PM   #1 (permalink)
A.C. Basbas
Banned
 
Join Date: Feb 2007
Location: Amherst, Maynard, and Northampton Massachusetts.

Micromag linkage help...

So I just snagged another PTP Micromag, and the linkage has got me bamboozled. It's an older model, dust black with a powerfeed (2 screw).

Obviously it doesn't use an AM/MM pin, because there's no rail, but there doesn't seem to be threading for an RT/Emag style pin... It won't take the pins from my centerfire Micromags either...

There's a large hole (the same width as an AM/MM pin) on the show side of the gun, and a smaller, half blocked hole on the passenger side.

Currently I'm using a standard AM/MM pin, and blocking the larger hole with a cork. As classy as this setup is , I'm anxious to set this old beauty up right.
A.C. Basbas is offline   Reply With Quote