View Single Post
Old 11-23-2011, 02:50 AM   #14 (permalink)
Smiley
Original SWARM
 
Smiley's Avatar
 
Join Date: Oct 2007

The lower tube to valve chamber solder may have flowed away from the 10 x 32 threads at the chamber inlet. The oring in the banjo fitting only seals to the outer surface of the lower tube, pressure may be leaking between the valve chamber and the lower tube to get to the front grip screw threads. Try spotfacing the sealing surface a little deeper so the oring seals directly to the valve chamber wall.

Last edited by Smiley; 11-23-2011 at 02:54 AM.
Smiley is offline   Reply With Quote