Thread: CCM A/T help?
View Single Post
Old 07-03-2012, 12:51 AM   #3 (permalink)
MCB Member
Join Date: Oct 2007

you need this screw only. no pins, no spring and ball.Your cam doesn't have a groove for the ball anyway. The screw will hold in the cam .The screw goes thru the lever into the pump rod and keeps the cam from coming out

CCM AT Cam/Lever/Screw Set - Pol Black - 7B0003 | eBay
Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.
CCMachinist is offline   Reply With Quote