Thread: CCM A/T help?
View Single Post
Old 07-03-2012, 08:04 AM   #5 (permalink)
Red - Black
Talfuchre's Avatar
Join Date: May 2006

If you really wanted the right cam - you would need to get a grooved cam to accept the ball and spring.

What Bill is saying is the Pump arm Screw will not allow the cam and arm assembly to come out when leaning it to the left.

Also - follow my manual and properly adjust the under travel screw. You will be fine.

Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote