The body is empty other than the hammer and trigger group. the direct feed is welded to both tubes but the solder is separated between the tubes at the front.
the lower tube was shortened from the K2 length to a KP3ish length so it may need a custom 12 gram rod.
They didn't retap the front plug theads quite as far as the factory so I would reccomend a fast changer with blue locktite.
It will need a K series hammer spring shortened a bit.
Benjamin BB rifle (Pre-Sheridan) Pirated stock
K2 body wich has a direct feed welded on
pre saftey trigger group with an RVA . SOLD