View Single Post
Old 09-29-2012, 08:22 PM   #4 (permalink)
Home of the lama
WALZ's Avatar
Join Date: Nov 2010
Location: Naples, Idaho

Brass and Wood Fan
Sounds to me like you might need a new spring set (main & valve).
Also a palmer dyna valve pin will help you get more shots.
For me 100% stock pmi is getting about 16 or so good shots and with a palmers dyna valve pin about 20 or so and if you enlarge the transfer ports and modify the valve to a one hole type you will get over 30 good shots with sized paint.
Widgets can also help with fps issues...
Hope this helps a bit...
Hope this helps you out...
WALZ Feedback

The new sheriff in town.....
WALZ is offline   Reply With Quote