View Single Post
Old 11-12-2012, 10:16 PM   #821 (permalink)
Join Date: Oct 2006

Originally Posted by danssoslow View Post
Thank you much. Having it in your hands; how hard would it be to add a picatinny rail to the pump handle and adding an AFG (plenty of meat in the pump to tap a 10-24, space below the barrel to install a helicoil, something of that nature)? Would putting one on the pump make pumping uncomfortable due to it being too low?

Thanks again!!!
the pump is hollowed out with structural support. if i was to drill and tap holes to accommodate a rail, i would fill the grip with jb weld first.

i imagine putting a rail on the pump wouldn't affect ergonomics too much. if anything it might be more comfortable since your pumping arm won't be reaching as far. the corners on the rails might dig into your meaty hands, but most people wear gloves anyway, and it's the rail's problem, not the gun.
heinous is offline   Reply With Quote