Thread: level 10 issue
View Single Post
Old 11-19-2012, 02:49 PM   #19 (permalink)
MCB Member
Spider!'s Avatar
Join Date: Dec 2008
Location: Houston, TX

Originally Posted by dukie View Post
the bolt should slide off if you hold the valve body up, not the other way around.
Or maybe you have to shake the bolt off a little. If it drops right off (into your hand as you turn it vertical), it's too loose. If you definitely have to pull the bolt off, it's too tight. If it is in between, it's good and don't mess with it unless it leaks.

That will tell you if you need a lvl 10 kit or not.
My Feedback

some things are stickier than others
Spider! is offline   Reply With Quote