View Single Post
Old 01-15-2013, 08:45 PM   #7 (permalink)
The Man With No Plan
super_stanchy's Avatar
Join Date: Nov 2008
Location: Oregon City, OR


just leavin the shop!

ran 11 parts through op1

have 6 left to go

then they need to be drilled .250" and cham'd
after that they go to op2, which is face, turn, knurl, turn, groove
after that its drill/cham/tap for 1/8npt
and drill the cross hole and they will be done!

aiming to have run #2 done friday!
super_stanchy is offline   Reply With Quote