View Single Post
Old 01-29-2013, 09:13 PM   #1 (permalink)
Ask me about my
Skibbo's Avatar
Join Date: Oct 2009

ASA to stock for Back Bottle

I came up with this design to use a CAR stock on my Hammer 7, but it'd work with any marker. It's currently incredibly long, I had to improvise some parts. You would need an air source for the marker to work, I would probably replace the gauge with a 45 elbow and a remote fitting.

Here's what it will look like (shows wrong ID buffer tube, but same idea)

I will drill and tap this for a 1/4-20 thread, but bottomed out so that air will not pass through, and I won't have to worry about thread tape.

Here's the prototype:

It has a 12 gram bucket changer fitting on the front, but a ASA to ASA would also work. It then has a remote line fitting to reduce from ASA to 1/4-20. Not shown is a rod going through the stock, capped off by a washer and cap nut to hold everything tight.

more pictures:

cap screw (I broke it by tightening it too much over the sharpened threaded rod...oops)

inner assembly:

washer caps off each end:

On the H7:
Originally Posted by heinous View Post
i find this easy to masturbate to
Designer of the first legit looking ego pump, the EgoP!

Tinkerer/ Pump lover
Team Akkadian Paintball Squad
OK D-Day '09 - German 716th IR

Last edited by Skibbo; 01-29-2013 at 09:16 PM.
Skibbo is offline   Reply With Quote