View Single Post
Old 02-13-2013, 11:09 PM   #1 (permalink)
dano_____'s Avatar
Join Date: Nov 2011
Location: Minnesota

S6.5 Regulator Input Position

So I have an S6.5 and put a set of ccm air fittings on it. The reg was off center a little with standard fittings so I figured it just needed the ccm fittings to make it fit with the frame. Things didnt go as I thought they would and the fitting still interferes with the trigger frame. I had seen other 6.5s with the reg centered, did I just get an early one(it's sn# 016) that didn't have this option originally? Any info would be helpful. Thanks!
Dan's Feedback
dano_____ is offline   Reply With Quote