View Single Post
Old 04-15-2013, 01:14 PM   #5 (permalink)
MCB Member
1shot's Avatar
Join Date: Apr 2013
Location: MN

Also check your cup seal. I just took mine apart and found it backed out. This tightens the spring lowering velocity. Be carful handling cup seals, try to keep it clean. I try not to tuch the flat end that makes the seal. I put a tiny amount of blue lock tight on the cup seal threads to hold it in place. If you do this be very carful to keep it off the flat end of the seal.
1shot is offline   Reply With Quote