View Single Post
Old 06-24-2013, 02:24 PM   #252 (permalink)
Herp Derp
Join Date: Oct 2010
Location: Macomb, Michigan

I figured out the other half of the cycling for the AGA 68 idea. Got the idea after finding a cocker slider trigger in the shop. The breechblock is under slight spring tension to help gravity pull it back down. When the hammer is cocked, a lever lifts the block up, like in a revolver, and as it reaches the firing position the wall of the elevator pushes a sliding, springloaded rod with an angled face back into the grip/body, when it reaches the locking notch in the bottom of the elevator the spring pushes it back forward, locking the breech/elevator assembly into place. The slider trigger is pulled, releases the hammer, and then a slight bit of over travel after firing slides the locking rod back and allows the elevator to be pulled back down to the feedtube.

I really wish I had access to a mill right now lol.
My Feedback:

Originally Posted by jincay View Post
Some might find that a turn on, I cater to differing tastes by including a hot chic and a middle aged overweight guy in a mankini.
Gustav12 is offline   Reply With Quote