View Single Post
Old 12-22-2014, 11:37 AM   #5 (permalink)
Acidpaintball
Posted from the toilet
 
Join Date: Sep 2009
Location: ohio

Brass and Wood Fan
Quote:
Originally Posted by David A. View Post
CCM springs too? The right springs make a big difference.
Everything is CCM internally besides the bolt, which i kept the original bolt.

Quote:
Originally Posted by CCM CHICK View Post
Give Rod a call when you have a moment. 1-877-412-6850 7am to 3:30pm pst
Will do after i get off work.

Quote:
Originally Posted by 1shot View Post
That 300-350psi operating pressure was for 2k and newer. I'm pretty sure pre 2k ran at higher pressures. I'd call CCM to make sure you are using the right parts. All my Snipers/Cockers are 2k, so I'm no expert.
I did ask to make sure what parts I needed and went with that. All my cockers are pre-2k and i know they liked higher psi, but when i crank it up higher the valve really hates it i mean to the point i am getting constant 112fps or non-registering fps that I can throw harder type.
Acidpaintball is offline