View Single Post
Old 07-20-2015, 09:04 PM   #9 (permalink)
packersrule729
Confronting the Shadow
 
packersrule729's Avatar
 
Join Date: May 2009
Location: SoCal (Formerly 617)

Quote:
Originally Posted by PistolRogue View Post
I'm really not sure of cross compatibility, which is why I've bought a few parts guns over the years and held on to parts like sears and hammers because those are the only wear parts I'm not sure I'll be able to find replacements for down the road. O-rings are easy since they're all standard and pierce seals as well. Sharpening the sear should work, you just want to use a nice flat stone and focus only on the small back surface, and not changing the angle, just keeping the same angle and removing only as much material as is necessary. How many times you can do this before the sear is no good, I have no idea.

It does have the added benefit of making the trigger pull smoother, just like a good trigger job on a real steel pistol.
Okay, I'll try sharpening it. Should I sharpen from the sides, or on the top/bottom as well
__________________

Feedback


"Come on you apes. You want to live forever?" -Johnny Rico
"The man in black fled across the desert and the gunslinger followed." -Stephen King, The Gunslinger
packersrule729 is offline   Reply With Quote