View Single Post
Old 05-25-2017, 09:01 AM   #2 (permalink)
engineer minded
Vitalsilence's Avatar
Join Date: Aug 2012

If you have a leak that would obviously kille efficiency. You need to try Yoda. Leaks have happened especially with the e1 and try to achieve minimum surface tension and dp tolerances. You can try different oring cant remember size. You also can use dow55 put a good amount on and let it sit. It will swell the oring a bit. But alot of grease to make it seal is good advice to see if its clase enough
Ebay Feedback %100 positive
MCB feedback
PBNation Feedback
Also on customcockers

Originally Posted by Nuke View Post
Some people are penny wise, and dollar foolish.
Vitalsilence is offline   Reply With Quote