Thread: BKO Issue
View Single Post
Old 05-08-2018, 01:20 PM   #1 (permalink)
MCB Member
Walker's Avatar
Join Date: Apr 2006
Location: Spokane, WA

BKO Issue

I picked up an older BKO over the weekend (at the Supergame), and after pulling and cleaning the solenoid, to get rid of leaks, it shoots beautifully.

But... The bolt does not retract completely... It extends into the breach by 1/8" or so...

When the pin is inserted in the slot in the ram, it is not at the back of the top slot. The ram can not be pushed any further into the housing.

Any thoughts? Is there any adjustment? Wrong Ram? Wrong bolt?

Any help would be appreciated...

p.s. - The pix is from the sellers ebay posting. I can take better ones this evening...
p.s.s - I also picked up a nice Alleycat at the Supergame. It came with three barrels, one is a Lapco AutoSpirit..
Attached Images
If you can't take the heat, then get out from under the bus!
Member of the Old Farts Paintball Players Association (OFPPA)
"Where You Wrap Up the Day, With Beer and Bengay!"

Nelson Owner's Group
My Feedback!

Last edited by Walker; 05-10-2018 at 02:15 AM.
Walker is offline   Reply With Quote