View Single Post
Old 06-08-2018, 11:04 PM   #9 (permalink)
Macdave06
MCB Member
 
Macdave06's Avatar
 
Join Date: Mar 2011

Making some chips. Not the most precise setup, but far better than a dremel. Pretty much pressure fit. I'm gonna put two 4-40 set screws in either side, then the frame screw will run up through as well. IMAG0466.jpegIMAG0467.jpegIMAG0468.jpegIMAG0465.jpeg
Macdave06 is offline   Reply With Quote