View Single Post
Old 12-05-2018, 02:43 PM   #9 (permalink)
FrankW
MCD Member
 
FrankW's Avatar
 
Join Date: Mar 2012
Location: So Cal (OC)

30 degrees (from horizontal) works well for me with cocker based guns. Doesn't stick up too much and clears my mask/visor. Given that you have a smaller print volume, I'd go with printing a cram n jam. If you want a stick feed, you could design it to accept a phantom feed tube.
__________________
Feedback
FrankW is offline   Reply With Quote