Gonna run the LPR inside the frame and feed it through a hose from the gauge port on the THOR. I'm just gonna drill and tap a 1/8" npt plug for 10-32 and do the same on the block in the frame. Probably swap the macdev LPR out for a tickler or one of those tiny SP(yuck) LPRs.
I need to find a small board that fits above the lpr and below the battery tray. DM4 board is too big.
I found a small SMC 3-way solenoid (S070-sgb-32) that already has the giant 1/8 barbs this thing uses. 20190210_111647.jpeg