View Single Post
Old 02-11-2019, 01:10 AM   #9 (permalink)
Macdave06
MCB Member
 
Macdave06's Avatar
 
Join Date: Mar 2011

Here's an exploded diagram. Think of it like a wrath but with the hammer and bolt combined. The tip of the bolt has a slot along the bottom that follows a pivot. When the bolt reaches the forward position it hits the pivot which pushes the valve pin down. The valve is in the vertical chamber at the front. Air comes up through the bolt. Theres a spring inside the rear of the bolt that returns it.
Macdave06 is offline   Reply With Quote