Kind of, I have a 2k5 superstock, stock detent if course worked fine, decided to move to a Killa products magnetic detent, wouldn't even work at all. The"neck" of the detent (after the threads, before the ball or whatever is actually in the breach) is so long that once the threads were engaged even a little, the neck was already in the breach interfering with the bolt.
So the length of the threads didn't really come into play but the design of the detent did.
I now use a CP detent, it is not screwed in all the way but is close, loc Tite holds it the rest of the way
Originally Posted by hellion360
You can loctite them into place to set depth.
This, do this