View Single Post
Old 03-25-2019, 09:54 PM   #8 (permalink)
glaman5266
Plays on the cheap
 
glaman5266's Avatar
 
Join Date: Jan 2007
Location: Central WI

Quote:
Originally Posted by hellion360 View Post
It can vary somewhat, but they are made to install with the o-ring on it.
You can loctite them into place to set depth.
I will try the loctite route. Thanks.
Quote:
Originally Posted by Trbo323 View Post
Just depends on your situation, wgp made bodies with different wall thicknesses and aftermarket companies don't always test their detents on all bodies.

Part of owning a cocker is problem solving
Yeah, that's kinda what I was wondering about. I don't have an o-ring on my 2k2 and the stock detent works perfectly. Same with the 2k RF I had years ago. I've never actually had this problem, as almost all the cockers I've owned were from WGP and used factory detents.

Thanks guys. I appreciate it.
__________________
Feedback: MCB, PbNation (older) (newer)
glaman5266 is offline   Reply With Quote