View Single Post
Old 04-14-2019, 10:21 PM   #3 (permalink)
turbowagonman
Ole' Papa Pump
 
turbowagonman's Avatar
 
Join Date: Oct 2012
Location: Chardon, Ohio

Quote:
Originally Posted by iamthelazerviking View Post
For a very short time, I had one of th Lapco barrels and only ever attached it to my Phantom at the time. These are said to work with the stock pump handle and while I could still cock it back and forth, it felt like it was rubbing on the barrel. Stock barrel felt just fine.

Anyone else run into that? I know a UC kit would fix everything, but don't want to spend the extra on one yet.
I currently have a Lapco on one of my Phantoms set up with the over the barrel pump handle on it and I have no interference at all. I've had 3 different varieties, the stock handle and 2 different colored acrylics and never any interference issues.
__________________



Started with a Splatmaster, moved onto a Nelspot 007, then came the Autocockers, then a STERLING Pump, next was a Bob Long defiant then a PM7. As of now I have 8 Sterling Pumps, 4 Phantoms, 4 PGP's, a P68SC, 2 Trracres, a 2K+ Sniper, 2 Nelspot 007's, a Bushmaster and a Carter Buzzard


Feedback:
https://www.mcarterbrown.com/forums/...-feedback.html
turbowagonman is offline   Reply With Quote