I re-ground the tip of the sear. Batting 80/90% now - 1 OR 2 burps in 10.
Issues with paint: Needs new paint with a harder shell. position of detente interferes slightly with feed. When you break a ball stops working.
I wonder if the sear pivot pin hole in the sear is causing burp? The machinist drilled it slightly over-sized (1/8 carbide drill wondered).
I fired from the hip with surprising accuracy out to 60'-70' . I also worked double taps - surprising good considering the long trigger pull.
Last edited by bond commander bond; 07-09-2019 at 11:53 AM.