View Single Post
Old 11-22-2019, 05:52 PM   #20 (permalink)
Slvwy
Newbie
 
Join Date: Oct 2019

Quote:
Originally Posted by Chaos View Post
Even though there's no pictures these mods are pretty easy. what I did to mine if you grind the tip of the sear where it catches the bolt you can make for an easier trigger release. What do you need to do is grind it so that it's not a 90 degree angle anymore and make it so that it's just slightly less of an angle that way when you pull the trigger it will release a lot easier I'll try to get some pictures up of what I did to mine.I've done it on all the Nelsons I've had since I own my last Phantom it works very well. Just don't grind it too much or the seer won't catch or will release on its own. Currently on my Hammer the trigger is so light all I have to do is breathe on it wrong and it'll fire because I grounded just a little too much but not so much that it doesn't work
I'd love some pictures if you're able to provide some! I have an idea of what to do but would like some confirmation.

Also if anyone has pictures of option #2 for the set screw in the trigger shoe. Again I feel like I understand where to drill and tap but would like some extra confirmation! The pictures that were posted before are no longer available
Slvwy is offline   Reply With Quote