mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 05-16-2018, 11:52 PM   #1 (permalink)
pop...splat splat splat
 
popsplat's Avatar
 
Join Date: May 2011
Location: SoCal

Past/Current/Future projects

I have a feeling this sub category will grow pretty fast and I think it would be awesome to keep a list (with links?) of all the projects members have created/projects to try next!

Post up! I'll try to keep a running track
7/18/2018 - 0713 PST



Done

RuleOfSines
- MicroMag Empire Springfeed
- MicroMag Cram N Jam feed
- Nightmare scope mount
- ATS AT85 Loader Delete Nose
- ATS Barrel shroud adapter

Rainmaker
- JT ER2 Pump Handle Pins
- JT ER2 Phatty Pump Handle - (Original design by Siress)
- Dangerous Power G3 Power Button Pad
- Target Stand pieces
- JT ER2 and ER2s freak insert adapter kit
- JT ER2 ball detent
- Azodin Kaos mini grip frame (for kid size hands)
- VForce Profiler lens retainer side pieces (not sure what they are called)
- Adapter for Ion Air Pro camera to go pro style mounts.

Law
- FPH6 - 4.5” CCI Phantom Pump Handle
- SPH6 - 2.5” CCI Phantom Pump Handle
- SPH5 - 2.5” CCI Phantom Pump Handle
- PHA - 4.5” & 2.5” CCI Pump handle accessory
- 4.5” version of the 5 with a hand strap
- Several 50 round loaders - they work but put on hold until I get a new printer to refine the print quality with.
- Minimalistic freak insert case
- Barrel front site
- Picatinny rail for the trilogy that slides onto the existing top rail and screws into the beavertail threading
- Mobius camera offset mount for the trilogy and for a rail, similar to the rail above

Taylord1350 || Pics!
- Spiral standard pump (short and long)
- Spiral standard pump with picatinny rail (to add external grips)
- Spiral standard pump with foregrip
- CCM Style pump handle (Fits over the barrel, after market kit necessary)
- Angled Foregrip style pump
- Also have a few designs ready for undercocking kits using the CCI single rod kit.

808-Snek
- Avratech R7 - "Honeycomb" Pump Handle

JonM
- Phantom Dropout Feed Cap Idea
- Milsig Squarehead Mag Speedloader


In Process

Rainmaker
- Sound moderating barrel raincover
- JT ER2s fixed feed tube
- Various modified versions of the Revolverloader (original design by Beantown paintball)

Taylord1350
- 3D printed phantom handle
- Phantom UC kits / pump handles that use 2-3 of the standard rods instead of 1. (You order 3 regular rods from CCI and my kit will fit them)
- Custom Phantom body (Detent mod, cocker threaded)
- 13ci tank adapter butt. Will fit 10 x 10rd tubes around it in a capless design. Also extends the tank butt back a bit. Final size will resemble a 45/45 tank.
- Duckslide kit (will come with a blocky pump handle that the rest of the kit will mount onto like a shroud)
- Redesign of the Revolverloader
- Various cram n jams / stick feeds
- 70-100 round revvy style hopper. (Most likely using our own built electronics, not ripping apart revvys)
- Phantom 86 degree grip frame.
- Phantom locking feedneck adapter for stock class body

JonM
- ULE Automag Classic Rail

808-Snek
- Adjustable Magnetic Bearing Trigger for Phantoms
- CCI One Piece Feed
- One piece feed with adjustable sights (mostly done)
- 90* and 72(ish)* VSC adapters (mostly done)
- Buzzard style pump handle (conceptual)

Tymcneer
- Reverse engineering the lens retainer for the Empire EVents/Flex to mount a camera more easily on mask


Future Projects
Rainmaker
- Sound/air dissipator for dry fire (i.e. no paint)

808-Snek
- Possibly a Box Gun kit with a low-profile dot sight and a pump handle (need to team up with someone with a printer for this one, the iterations via Shapeways are way too spendy for my budget)(very conceptual)
- A hard point to attach a one-point sling (conceptual)
- R7 front sight (conceptual)
- R7 some pump handles (one done, others conceptual)
- Some muzzle breaks and barrel parts (conceptual)

Taylord1350
- Designing a SPAS-12 kit for the phantom. Will be using a reverse stick feed, rear bottle valve with 13ci tank. Will be building a kit that goes over the barrel and reverse stick feed, with a custom pump handle and a custom stock that slides over the 13 oz tank


Ideas!

Clueless
- 3D printed variation of the Phantom UC kits (see Taylord1350)
.
.
.
.
__________________
Feedback

"I don't get out often, but when I do, I prefer being one balled...stay accurate my friends."

Last edited by popsplat; 07-18-2018 at 10:15 AM.
popsplat is offline   Reply With Quote
Old 05-17-2018, 12:18 AM   #2 (permalink)
New In Box Broken
 
RuleOfSines's Avatar
 
Join Date: Dec 2012
Location: Massachusetts

Done Paintball stuff
MicroMag Empire Springfeed - https://www.thingiverse.com/thing:2243390
MicroMag Cram N Jam feed - https://www.thingiverse.com/thing:1789110
Nightmare scope mount - https://www.thingiverse.com/thing:1789466
ATS AT85 Loader Delete Nose - https://www.thingiverse.com/thing:2016288
ATS Barrel shroud adapter - https://www.thingiverse.com/thing:2136472


I've largely switched over to Drones, so most of time lately has gone to that.
RuleOfSines is online now   Reply With Quote
Old 05-17-2018, 08:01 AM   #3 (permalink)
Previously blasdgag
 
Rainmaker's Avatar
 
Join Date: Dec 2017
Location: Huntsville, AL

Past/Current/Future projects

Here are my designs that are complete and available on Thingiverse:
JT ER2 Pump Handle Pins: https://www.thingiverse.com/thing:2750164
JT ER2 Phatty Pump Handle: https://www.thingiverse.com/thing:2808627 (not originally designed by me, but revised and posted by me. Original design by Siress)
Dangerous Power G3 Power Button Pad: https://www.thingiverse.com/thing:2867269
Target Stand pieces: https://www.thingiverse.com/thing:1706352

Here are my designs that are complete but NOT posted online:
JT ER2 and ER2s freak insert adapter kit
JT ER2 ball detent
Azodin Kaos mini grip frame (for kid size hands)
VForce Profiler lens retainer side pieces (not sure what they are called)
Adapter for Ion Air Pro camera to go pro style mounts.

Here are the designs that are currently in progress:
Sound moderating barrel raincover
JT ER2s fixed feed tube

Here are the design ideas I have for the future:
Sound/air dissipator for dry fire (i.e. no paint)

I'm forgetting some, so I'll add them later when I remember :P
__________________
Dangerous Power G3
PE Etek 3 AM
JT ER2 with 3D printed mods
Rainmaker's Feedback

Last edited by Rainmaker; 05-17-2018 at 11:30 AM.
Rainmaker is online now   Reply With Quote
Old 05-17-2018, 10:04 AM   #4 (permalink)
Law
Where's Tug Contest Winner
 
Law's Avatar
 
Join Date: Feb 2011
Location: MA

Hmm I need to put more stuff online thinking back, but here's what's posted now:

FPH6 - 4.5” CCI Phantom Pump Handle - https://www.thingiverse.com/thing:2818987
SPH6 - 2.5” CCI Phantom Pump Handle - https://www.thingiverse.com/thing:2818972
SPH5 - 2.5” CCI Phantom Pump Handle - https://www.thingiverse.com/thing:2818935
PHA - 4.5” & 2.5” CCI Pump handle accessory - https://www.thingiverse.com/thing:1306924

Some stuff I worked a while on but never really posted:
- 4.5” version of the 5 with a hand strap
- Several 50 round loaders - they work but put on hold until I get a new printer to refine the print quality with.
- Minimalistic freak insert case
- Barrel front site
- Picatinny rail for the trilogy that slides onto the existing top rail and screws into the beavertail threading
- Mobius camera offset mount for the trilogy and for a rail, similar to the rail above
Law is offline   Reply With Quote
Old 05-17-2018, 10:46 AM   #5 (permalink)
pop...splat splat splat
 
popsplat's Avatar
 
Join Date: May 2011
Location: SoCal

Updated!
__________________
Feedback

"I don't get out often, but when I do, I prefer being one balled...stay accurate my friends."
popsplat is offline   Reply With Quote
Old 05-17-2018, 11:30 AM   #6 (permalink)
Previously blasdgag
 
Rainmaker's Avatar
 
Join Date: Dec 2017
Location: Huntsville, AL

Oh a couple more from me. Completed but not posted online:
- VForce Profiler lens retainer side pieces (not sure what they are called)
- Adapter for Ion Air Pro camera to go pro style mounts.
__________________
Dangerous Power G3
PE Etek 3 AM
JT ER2 with 3D printed mods
Rainmaker's Feedback
Rainmaker is online now   Reply With Quote
Old 05-17-2018, 11:42 AM   #7 (permalink)
pop...splat splat splat
 
popsplat's Avatar
 
Join Date: May 2011
Location: SoCal

Also if anyone has an idea offer it up! I'm sure one of the people here will pick it and run with it
__________________
Feedback

"I don't get out often, but when I do, I prefer being one balled...stay accurate my friends."
popsplat is offline   Reply With Quote
Old 05-22-2018, 10:51 AM   #8 (permalink)
Previously blasdgag
 
Rainmaker's Avatar
 
Join Date: Dec 2017
Location: Huntsville, AL

Another one, work in progress:
- Various modified versions of the Revolverloader (original design by Beantown paintball)
__________________
Dangerous Power G3
PE Etek 3 AM
JT ER2 with 3D printed mods
Rainmaker's Feedback
Rainmaker is online now   Reply With Quote
Old 05-22-2018, 12:05 PM   #9 (permalink)
pop...splat splat splat
 
popsplat's Avatar
 
Join Date: May 2011
Location: SoCal

updated
__________________
Feedback

"I don't get out often, but when I do, I prefer being one balled...stay accurate my friends."
popsplat is offline   Reply With Quote
Old 05-22-2018, 01:01 PM   #10 (permalink)
MCB Member
 
JonM's Avatar
 
Join Date: Jun 2013
Location: Landisburg, PA

Brass and Wood Fan
This thread should probably be stickied.
__________________
My Feedback Thread
JonM is online now   Reply With Quote
Reply

  mcarterbrown.com » Custom » Custom Projects / Custom Questions » 3D Printing

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 03:06 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC