| ||Thread Tools||Search this Thread|
|11-28-2019, 07:14 PM||#1 (permalink)|
Join Date: Mar 2012
Location: So Cal (OC)
Printed Nelspot 007 pump handle, feed and plug
I finally played with this last weekend and it worked like a champ. The pump handle has arms on both sides. The plug extends down and acts as a ball stop. The plug and the feed are just shoved in there. Hopefully they won't loosen over time. So far so good.
I made a few minor adjustments to the models. They're available on i.materialise through the links below if anyone is interested. Also made a version without the sights. I was going to share it on Shapeways, but it's being weird (plus i.materialize is cheaper).
You'd need a phantom feed gate for the feed. The front sight is made for a HiViz sight filament that I got from a friend. (Diameter of the hole is .126").
Feed w/ sight
Feed w/o sight
Front plug w/ sight
Front plug w/o sight
Last edited by FrankW; 11-30-2019 at 01:34 PM.
|11-28-2019, 11:12 PM||#4 (permalink)|
How do I turn this on?
Join Date: May 2009
Awesome. What's the barrel you've got going on there?
|Thread Tools||Search this Thread|